Thursday, February 19, 2015

Adding Cross-X Lines to Unitized Panel Families


In a unitized curtain wall system, when looking at an elevation view, it isn’t always easy to determine the extents of any particular unit.  This can be even more difficult with the introduction of doors, windows, L-shaped units and  false-stack conditions.  By adding dashed lines, called cross-X lines, to the extents of the unit, it becomes easier to determine the limits of each unit.  This tutorial will cover adding cross-X lines to a Curtain Panel family in Revit.

                  
 The cross-X lines need to appear in elevation and 3D views and flex as the unit flexes to accommodate changes in height and width.  In the Curtain Panel family, we’ll start with a typical 3-lite unit and add the model lines.



1.  Model lines are drawn in the current reference plane.  In the plan view, either ensure that the Front reference plane is at the front of the unit or create a new reference plane.





2.  Switch to the Exterior elevation view.  In the Create tab, click the Set Work Plane button on the Work Plane panel to open the Work Plane dialog Box.


3.  In the Work Plane dialog box, select the Name radio button then select the reference plane that corresponds with the front of the unit.  Click the OK button.



4.  Click the Model Line tool.  Draw a line across the surface of the unit; the ends should be near the unit extents but do not place them precisely yet.



5.  Zoom in to one corner of the unit.  Select the model line to expose the grip then drag the grip to the corner of the unit.  The line may attempt to restrict the endpoint’s position to remain along the same vector as the line.  If necessary, press the Tab key to allow a 360 degree freedom of movement.  When the Endpoint grip highlights, release the mouse button.




6.  When the lock icon appears, click it to lock the endpoint of the model line to the element that was snapped to.
7.  Repeat the process at the opposite corner.



8.  Repeat the process for the model line that runs in the opposite direction.



The cross-X lines should appear different than the continuous lines.  In this case, we’ll assign them to the Hidden linetype.


9.  Select both model lines; this will open the Modify|Lines contextual tab.  Expand the Subcategory drop-down list then choose Hidden Lines (Projection).


10.   Select both model lines again then click the Edit button in the Graphics area of the Properties palette.


11.  In the Family Element Visibility Settings dialog box that appears, uncheck the Plan/RCP and Left/Right options to prevent the cross-X lines from appearing in those types of views. This affects the family when it is loaded into a project and not as it appears in the family editor.  Click OK.




 The unit now has cross-X lines that flex with the constraints of the curtainwall panel and are visible in elevation and 3D views



4 comments:

  1. You can also have a visibility parameter to hide them in all views. Click on the button to right of 'Visible' parameter shown in the image above and add a parameter.
    The cross-lines can also be turned off in a view by turning off the 'Hidden Line' subcategory.

    ReplyDelete
    Replies
    1. Hi Anthony,
      Thanks for the input. I'm not sure why we would want them hidden in all views though. Our intent is to display them on sheets showing elevations to clarify which glass/ACM/stone elements belong to which units. The cross-X lines are not shown in plans and section because they are coplanar with the face of glass.

      Delete
  2. glass curtian wall - Welcome to Sunnyquick, We are a specialist manufacturer of glass curtain wall, aluminium windows and aluminium doors. We provide the best glass facade, aluminium facade, aluminium windows and aluminium doors. Contact us now - 0086 134 3025 9282

    ReplyDelete