Wednesday, July 30, 2014

Accurate Profiles Equal Accurate Curtain Walls

 The basic workflows for creating and assigning mullions to a Revit curtain wall are fairly straightforward.  You can either design a mullion type, with a specific mullion profile family designated in the Profile parameter, then assign that type to a curtain grid line or select an existing mullion on the curtain wall, duplicate the type, then assign a new profile to that mullion.  Profiles are assigned in the Type Properties dialog box.

In the mullion profile family file, there are two reference planes and both have their positions pinned by default.  At intermediate curtain wall grid lines, the vertical reference plane in the profile family is aligned with the grid line while the horizontal plane is aligned to the front of the curtain wall.  In jamb, head, or sill conditions, the edge of the profile is aligned to the edge of the curtain wall so that the entire profile is enclosed within the extents of the curtain wall.

The image below shows a 20’-0” long curtain wall with four vertical mullions in place.  The continuous dimensions, along the top and bottom, both add up to the total length of the curtain wall, but the first and last dimensions of each string are different.

What is causing the discrepancy?  The top string of dimensions is measuring to the center of the mullion as defined by the location of the vertical Center Of Mullion reference plane in the mullion family file. The bottom string of dimensions is measuring to the horizontal midpoint of the vertical mullion.  These should be in the same location, but in this instance, they are not.  Let’s take a look at the mullion profile.

As you can see, the mullion profile is not centered on the reference plane.  This is a situation that we’ve encountered, on occasion, when using content provided by third parties.

Why is a small dimensional inaccuracy a concern?  Mullions, anchors, kickers and embeds are usually aligned to their respective center lines.  If one of these is not located properly, then it may cause a clash at each occurrence which can add thousands of clashes to a project that would need to be addressed.
To remedy this, we can’t simply select the left-most line of the profile and change the dimension; this would result in a non-symmetrical and inaccurate  mullion.  Instead, we’ll delete half the profile, fix the remaining half, and then mirror the lines to complete the profile as shown here:

       1.       Delete or trim the side of the mullion that is shorter than the other.

       2.      Add and lock any horizontal dimensions that must remain constant.

       3.      Change the overall length

       4.      Select all of the lines (hover over one, press the Tab key, then click the left mouse button) then use the Mirror – Pick Axis tool from the Modify panel to mirror them about the vertical reference plane.

       5.      It’s a good practice to use a few lines as possible in your profiles.  The four short, horizontal lines that touch the vertical reference plane can be reduced to two lines by deleting one and stretching the other at both ends of the mullion. This will also eliminate an unnecessary vertical line in your elevations.

       6.      Save the family then use the Load Into Project tool to load the profile family into the Revit project.  In the Family Already Exists dialog box, choose either the Overwrite The Existing Version or Overwrite The Existing Version And Its Parameter Values option, depending on whether the profile has parameters included.

       7.      In the project, the dimensions measuring to the centerlines and the dimensions measuring to the midpoints are now equal.

Accurate curtain wall mullion profiles are essential to creating accurate curtain walls in Revit.  A little time spent ensuring that your profiles are correct at the beginning of a project can prevent headaches and reduce revision time later in the project’s lifespan.


  1. You have define step by step this is really good to understand, thanks for sharing this nice stuff about curtain walling.

  2. Thanks Stuart. If there is something that you would like covered in a future post, please let us know.


  3. Nice images you have posted.An architecture can understand everything, when he reading the blog content and see the images vividly.

    BIM modeling Services

  4. That will be valuable to everyone who uses it, including myself. Thanks!

  5. This comment has been removed by the author.

  6. Great post

  7. Thanks for sharing!

  8. If you're planning on selling your home at any time in the future, and hoping to make a profit compared to what you initially paid for the home, installing new home replacement windows is a smart idea and a great investment. Home Replacement Windows

  9. Its a great pleasure reading this post. Want to share with another useful article millwork details